Plates/Pads/Shields/Oring for S/S Repackable Cartridge #44300

A 3.75" x 24" column containing BOTH a coalescer and a chemical filter. A single filtration device for use on small compressors (10 cfm or less) or to bolster existing systems in certain applications. See price list to select filter cartridges; drain valve NOT included (see #44135). Includes (2) adapters to convert the 3/8 SAE female ports to 1/4 NPT female. Normal Lead Time is 2-4 weeks. Order #44154 for seal kit.

Adjustable "pop-off" valve which can be calibrated from 300 to 5,500 psi. Nickel plated brass for 6,000 psi service. 1/4" male NPT inlet. Used to protect filters, separators, storage vessels or compressor inter-stages. Comes uncalibrated with instructions. Order #46322OX for O2/Nitrox Version.

Adjustable "pop-off" valve which can be calibrated from 300 to 5,500 psi. Nickel plated brass for 6,000 psi service. 1/4" male NPT inlet. Used to protect filters, separators, storage vessels or compressor inter-stages. Comes uncalibrated with instructions. Delivered Oxy-clean.

A repair kit for #46110. Includes a new filter element and two O-rings.

Seal Kit for After Separator #44130

Seal Kit for Short Filter Tower #44140, Tall Filter Tower #44150 and Purifier Combination Tower #44160. Order #44152 for O-ring only. Order #44153 for backup ring only.

This 3.75" x 16" tower uses 10" disposable chemical cartridge to cleanse the compressed air. The screw-off end caps make replacing the cartridges a swift, simple task. Each tower will process about 12,000 cu. Ft. of air per cartridge. Select the cartridge with the desired filtrants from the cross-reference in the Global price list. Includes (2) adapters to convert the 3/8 SAE female ports to 1/4 NPT female. Normal Lead Time is 2-4 weeks. Order #44154 for seal kit.

1 replacement blue moisture ring (single phase humidity disk) for use in the #44070 Colorimetric Air Quality Monitor.

Sintered element replacement for After Separator #44130.

Prudent dive shops strive to maintain a low dew point in their scuba air and also achieve maximum life expectancy from expensive filter cartridges. However, air must be 99% dry before entering the chemical filters or neither objective will be met! To accomplish this, an after-separator and a priority valve are required. The latter unit is an adjustable check valve which holds about 1700 psi of back-pressure on the filter system at all times. This raises the density of the air, increases the...

Adjustable "pop-off" valve which can be calibrated from 300 to 5,500 psi. Anodized aluminum for 6,000 psi service. 1/4" NPTM inlet. Used to protect filters, separators, storage vessels or compressor interstages. Comes uncalibrated with instructions. Additional Info: These special valves are used to protect pressure-sensitive components or to relieve pressure at some prescribed level in compressed air systems. Standard relief valves are designed for sudden, intermittent, and sporadic service,...