High pressure port (7/16-20) extender: Shims hoseless computer transducer out from regulator body. Working Pressure: 3,000 psi.

Standard black low pressure 1/4" ID BC hose connecting a 3/8-24 LP port on a first stage to a standard BC quick disconnect fitting. Fiber reinforced rubber construction yields a working pressure of 400 psi and 1,200 psi burst. Fittings are constructed of chrome plated brass. All hoses are constructed in house and built to order. Specified hose lengths are cut with fittings crimped afterward. i.e. a 24 in hose is cut 24 inches long with fittings subsequently added yield an overall length...

Standard black low pressure 5/16" ID regulator hose connecting a 3/8-24 LP port on a first stage to a 2nd stage with a standard 9/16-18 swivel. Fiber reinforced rubber construction yields a working pressure of 400 psi and 1,200 psi burst. Fittings are constructed of chrome plated brass. All hoses are constructed in house and built to order. Specified hose lengths are cut with fittings crimped afterward. i.e. a 24 in hose is cut 24 inches long with fittings subsequently added yield an overall...

Standard yellow low pressure 5/16" ID regulator hose connecting a 3/8-24 LP port on a first stage to a 2nd stage with a standard 9/16-18 swivel. Fiber reinforced rubber construction yields a working pressure of 400 psi and 1,200 psi burst. Fittings are constructed of chrome plated brass. All hoses are constructed in house and built to order. Specified hose lengths are cut with fittings crimped afterward. i.e. a 24 in hose is cut 24 inches long with fittings subsequently added yield an overall...

This adapter connected to the end of a standard regulator hose swivel on our Hookahroo Hose or a regulator hose. It provides three standard, 3/8-24 low pressure ports. These ports can be used to connect up to three other regulators or Hookahroo hoses. Includes two 3/8-24 plugs as standard. Made of chrome plated brass. For Hookahroo applications, add the 61033 float for added buoyancy or the 61034 Hose Storage Case for storage of extra plugs and o-rings.

Regulator hose union: Allows 2 standard regulator hoses to be mated. 3/8-24 female to 9/16-18 male. Working pressure: 400 psi.

A hard plastic regulator dust cap with string to protect the inlet on common yoke-mode regulators.

A 90 degree swivel with two 7/16-20 outlets for multiple consoles, gauges, or computer devices. Working pressure 3,000 psi.

A 90 degree swivel with 3/8-24 inlet and 7/16-20 outlet; for putting current consoles on older model regulators. Working pressure 3,000 psi.

A 90 degree swivel for right-angle installation of LP regulator hoses with 1/2-20 male end fittings. Working pressure: 400 psi.

For the right-angle installation of older consoles/gauges with 3/8-24 threads. Working pressure 3,000 psi.

A 90 degree swivel for right-angle installation of LP regulator hoses with 3/8-24 male end fittings. Working pressure: 400 psi.