Products 25-36 of 94
Show
Availability: Active
Item #: 45150 -
Designed for filling tanks with the standard Yoke connection. Global produces all scuba filler whips using our exclusive high pressure certified thermoplastic hose rated for 6,000 psi working pressure and 20,000 psi burst. Each filler whip has a 5 foot long, 1/4" ID hose with 1/4" NPT male end, a line valve and bleeder screw on a chrome plated brass bleeder block included as standard. This whip also incorporates a 5,000 psi liquid filled gauge. 3,200 psi service. Air service only.
Availability: Active
Item #: 45195 -
Combines the two most popular fills in one whip. Standard end is a 300 Bar DIN fitting for 4,500 psi service but includes the #45188 converter. The converter screws onto the DIN fitting and converts it to a 3,200 psi service end for a standard yoke. Global produces all scuba filler whips using our exclusive high pressure certified thermoplastic hose rated for 6,000 psi working pressure and 20,000 psi burst. Each filler whip has a 5 foot long, 1/4" ID hose with 1/4" NPT male end, a line valve...
Oxy Clean!
Availability: Active
Item #: 45188OX -
This hand-tite, screw on adapter converts a male 300-bar DIN connection to a standard filler yoke. Used with a DIN cross-over, tank check or filler attachment, it facilitates connection to a standard tank valve from a device with a male 300-bar DIN fitting. 3,200 psi service. Delivered oxy clean.
Oxy Clean!
Availability: Active
Item #: 45181OX -
A 300-Bar (4,500 psi) fitting with a fine internal thread to mate to most common bleeder blocks. External thread mates to many DIN tank valves. This can be a replacement part for many of Global's Din 300 Bar attachments. 4,500 psi service. Delivered oxy clean.
Availability: Active
Item #: 45181 -
A 300-Bar (4,500 psi) fitting with a fine internal thread to mate to most common bleeder blocks. External thread mates to many DIN tank valves. This can be a replacement part for many of Global's Din 300 Bar attachments. 4,500 psi service. Air service only. Order #45181OX for O2/Nitrox version.
Availability: Active
Item #: 45184 -
A 300-Bar DIN-thread handwheel with a mating DIN-tailpiece that has a 1/4" NPTM on its free end. Converts a DIN valve port to common male NPT. 4,500 psi service. Air service only. Order #45184OX for O2/Nitrox version.
Availability: Active
Item #: 45188 -
This hand-tite, screw on adapter converts a male 300-bar DIN connection to a standard filler yoke. Used with a DIN cross-over, tank check or filler attachment, it facilitates connection to a standard tank valve from a device with a male 300-bar DIN fitting. 3,200 psi service. Air service only. Order #45188OX for O2/Nitrox version.
Availability: Active
Item #: 45091 -
Flange Nut and Retainer Clip Only for #45090. One side of this adapter has a machined flange which mates to the O-ring groove on any scuba tank valve; the other side is ported 1/4" NPTF. Used as a replacement part for many Global Yoke assemblies. 3,200 psi duty.
Availability: Active
Item #: 45015 -
Direct jump adapters from scuba yokes to 4,500 psi SCBA (CGA 347) breathing air packs are unsafe because the working pressure involved is beyond the point of yoke distortion and O-ring extrusion. Install #45015 (1/4" NPTF inlet) on your filler at the line valve to convert the whip to a 4,500 psi SCBA filler. Stainless handtite wheel with soft-seal nipple. (Order #45016 for replacement tip seal.)
Availability: Active
Item #: 45175 -
A special whip for filling hi-pressure fire/rescue (SCBA) packs to 4,500 psi. The handtite stainless steel connector will accommodate both CGA347 and 346 SCBA tanks, whereas CGA346 whips can charge only 346 units. Global produces all scuba filler whips using our exclusive high pressure certified thermoplastic hose rated for 6,000 psi working pressure and 20,000 psi burst. Each filler whip has a 5 foot long, 1/4" ID hose with 1/4" NPT male end, line valve and stainless steel bleeder. 4,500 psi...