Rated for 2,500 psi, this inexpensive vent has 1/4" male NPT base threads and a non-replaceable, molded seat.

Adds a barbed fitting to the drain port of the #46233 allowing the vented gas to be tubed and directed. Commonly used for moisture or liquid drains, such as those on an after separator. Upstream pressures of up to 6,000 psi are allowed. But, care should be taken when draining due to the simple barb connection on the output. High pressure connection is 1/4 NPT male.

A special chromed-brass body with a 1/4 NPT male and female end ports. A standard Global bleeder is opposite a 1/4 NPT female gauge port. 3,250 psi service. This part can be ordered Oxy-clean. See 46335OX for Oxy-clean version. Previous Oxy-clean version of this part went by part #45335OX.

A special chromed-brass body with a 1/4 NPT male and female end ports. A standard Global bleeder is opposite a 1/4 NPT female gauge port. 3,250 psi service. Provided oxy-clean.

A special chromed-brass body with a 1/4 NPT male and female end ports. A standard Global bleeder is opposite a 1/4 NPT female gauge port. The bleeder screw has a 10-24 tapped hole. This allows the screw to be attached to a tether preventing loss or damage. 3,250 psi service.

A special chromed-brass body with a 1/4 NPT male and female end ports. A standard Global bleeder is opposite a 1/4 NPT female gauge port. The bleeder screw has a 10-24 tapped hole. This allows the screw to be attached to a tether preventing loss or damage. 3,250 psi service. Provided oxy-clean.

A Stainless Steel, In-line Bleeder with a replaceable seat and a large control knob. Ports are 1/4 NPT female. 6,000 psi duty. Order #45086 for replacement seat. This part can be ordered Oxy-clean. See #46230OX for Oxy-clean version. Previous Oxy-clean version of this part went by part #45366OX.

A Stainless Steel, In-line Bleeder with a replaceable seat and a large control knob. Ports are 1/4 NPT female. 6,000 psi duty. Order #45086 for replacement seat. Provided oxy-clean.

A Stainless Steel, In-line Bleeder with a replaceable seat and a large control knob. The control knob has a 10-24 tapped hole. This allows the knob to be attached to a tether preventing loss or damage. Ports are 1/4 NPT female. 6,000 psi duty. Order #45086 for replacement seat.

A Stainless Steel, In-line Bleeder with a replaceable seat and a large control knob. The control knob has a 10-24 tapped hole. This allows the knob to be attached to a tether preventing loss or damage. Ports are 1/4 NPT female. 6,000 psi duty. Order #45086 for replacement seat. Provided oxy-clean.

A Stainless Steel, In-line Bleeder with a replaceable seat and a large control knob. Ports are 1/4 NPT male & female. 6,000 psi duty. Order #45086 for replacement seat. This part can be ordered Oxy-clean. See 46231OX for Oxy-clean version. Previous Oxy-clean version of this part went by part #45365OX.

A Stainless Steel, In-line Bleeder with a replaceable seat and a large control knob. Ports are 1/4 NPT male & female. 6,000 psi duty. Order #45086 for replacement seat. Provided oxy-clean.