Composed of a single tower (3.75 x 24"), filter cartridge, and associated hardware mounted on metal plate. Air enters the top of the filter and exits at the filter block / priority valve on the base plate. A carrying handle on the top of the tower allows this filter to be used "in the field" as well as in the dive shop (Weighs 25 Ibs). Accommodates air flow rates up to 6-8 cu. ft. / minute and will process up to 7000 cu. ft. of OCA. Order #44353 for Hyper-Process Cartridge.

Replacement Hyper Process Cartridge Hyper-Filter for Single Tower System. Picture is representative only. Appearance of actual filter may differ.

Replacement Hyper-Clean Cartridge for tower #2 of Hyper-Filter Double Tower System. Picture is representative only. Appearance of actual filter may differ.

Replacement Hyper-Dry Cartridge for tower #1 of Hyper-Filter Double Tower System. Picture is representative only. Appearance of actual filter may differ.

Consists of two tall towers (3.75 x 33"), two cartridges, and associated hardware mounted on a metal plate. A filter block with an inlet valve allows isolation of the system when not in use. Will accommodate air flow rates up to 12 cu ft. / minute and will process about 40000 cu. ft. of OCA per cartridge set. Designed for permanent installation in a dive shop. 5000 psi service. Order #44351 for Hyper-Dry Cartridge for tower 1, #44352 for Hyper-Clean Cartridge for tower 2.

Viton O-ring kit for 44350 Hyper Filter Double Tower and 44355 Hyper Filter Single Tower.