Home > Compressed Gas Hardware
Products 1-12 of 234
Show
Availability: Active
Item #: 67171S -
08L Female Swivel X #4 JIC Male. This metric fitting conforms to DIN 2353 and is an adapter used on Komptec Compressors and other European devices. It easily converts the metric fitting to a moer common American JIC. Working Pressure: 5,000 psi. Steel.
Availability: Active
Item #: 45060 -
A brass manifold tee that connects to a CGA 346 storage valve and allows the connection of�a CGA346 pigtail or nut and tailpiece to each side. �For air to 3000 psi. �Additional Info: �To join a series of commercial gas cylinders of the same CGA type, MANIFOLD TEES and PIGTAILS are needed. �These are usually made of brass and copper, although stainless steel is sometimes needed at high pressures or in marine environments. �TEES attach directly to the CGA tank valve, thereby providing two extra...
Availability: Active
Item #: 45045 -
This modular apparatus can control and distribute high pressure scuba air from your compressor to and from storage cylinders as well as into scuba tanks as required. Rated for 5,000 psi service, it consists of a heavy brass manifold bar containing three ball valves to control and direct air flow. Ball valves require no directional flow; thus they can control air-flow into our out of an air storage bank without being damaged. Therefore, this unit can control air from three individual storage...
Availability: Active
Item #: 46180 -
An excellent brass, air control valve for compressor lines, scuba fill whips, or air distribution panels. Only 1/4 turn is required to open valve, but precise control can still be maintained. Unlike most valves, air can flow either way through the orifice without harming it. A real time-saver on fill whips. 1/4" FNPT ports. 3,000 psi working pressure. Can be panel mounted through a 0.77" hole in a panel no more then 1/4" thick. Very easy to rebuild: Order rebuild kit #46183 for Parker valve or...
Availability: Active
Item #: 46170 -
An excellent stainless steel air control valve for compressor lines, scuba fill whips, or air distribution panels. Only 1/4 turn is required to open valve, but precise control can still be maintained. Unlike most valves, air can flow either way through the orifice without harming it. A real time-saver on fill whips. 1/4" FNPT ports. 6,000 psi working pressure. Can be panel mounted through a 0.77" hole in a panel no more then 1/4" thick. Very easy to rebuild: Order rebuild kit #46171 for Parker...