A brass manifold tee that connects to a CGA 346 storage valve and allows the connection of a CGA 346 pigtail or nut and tailpiece to each side. For air to 3000 psi. Additional Info: To join a series of commercial gas cylinders of the same CGA type, MANIFOLD TEES and PIGTAILS are needed. These are usually made of brass and copper, although stainless steel is sometimes needed at high pressures or in marine environments. TEES attach directly to the CGA tank valve, thereby providing two extra CGA...

A brass pigtail with a CGA 346 nut and tailpiece assembly at each end that connects to either a CGA 346 manifold tee or storage valve. For air to 3000 psi. Additional Info: To join a series of commercial gas cylinders of the same CGA type, MANIFOLD TEES and PIGTAILS are needed. These are usually made of brass and copper, although stainless steel is sometimes needed at high pressures or in marine environments. TEES attach directly to the CGA tank valve, thereby providing two extra CGA outlets...

A terminal connector used when manifolding CGA 346 (Breathing Air) tank valves with JIC tees #45079 and hose pigtails #45078. Consists of Steel JIC elbow with CGA 346 brass nut and nipple.

A terminal connector used when manifolding CGA 347 (High Pressure Breathing Air) tank valves with JIC tees #45077 and hose pigtails #45078. Consists of Steel JIC elbow with CGA 347 brass nut and nipple.

A tee used when manifolding CGA 346 (Breathing Air) tank valves. Use the #45078 interconnect hose to connect with additional tees or the #45074 elbow. Consists of Steel JIC tee with CGA 346 brass nut and nipple.

A tee used when manifolding CGA 347 (High Pressure Breathing Air) tank valves. Use the #45078 interconnect hose to connect with additional tees or the #45073 elbow. Consists of Steel JIC tee with CGA 347 brass nut and nipple.

A terminal connector used when manifolding CGA 540 (Oxygen) tank valves. Use the #45076OX interconnect hose to connect with JIC tee, #45071OX. Consists of Stainless Steel JIC elbow with CGA 540 brass nut and nipple. Delivered Oxy-clean.

A tee used when manifolding CGA 540 (Oxygen) tank valves. Use the #45076OX interconnect hose to connect with additional tees or the #45071OX elbow. Consists of Stainless Steel JIC tee with CGA 540 brass nut and nipple. Delivered Oxy-clean.

A brass manifold tee that connects to a CGA 347 storage valve and allows the connection of a CGA 347 pigtail or nut and tailpiece to each side. or air to 5,500 psi. Additional Info: To join a series of commercial gas cylinders of the same CGA type, MANIFOLD TEES and PIGTAILS are needed. These are usually made of brass and copper, although stainless steel is sometimes needed at high pressures or in marine environments. TEES attach directly to the CGA tank valve, thereby providing two extra CGA...

A brass manifold tee that connects to a CGA 580 storage valve and allows the connection of a CGA 580 pigtail or nut and tailpiece to each side. Delivered Oxy-clean for inert gas (Helium / Argon) service to 3000 psi. Additional Info: To join a series of commercial gas cylinders of the same CGA type, MANIFOLD TEES and PIGTAILS are needed. These are usually made of brass and copper, although stainless steel is sometimes needed at high pressures or in marine environments. TEES attach directly to...

A brass pigtail with a CGA 580 nut and tailpiece assembly at each end that connects to either a CGA 580 manifold tee or storage valve. Delivered Oxy-clean for inert gas (Helium / Argon) service to 3000 psi. Additional Info: To join a series of commercial gas cylinders of the same CGA type, MANIFOLD TEES and PIGTAILS are needed. These are usually made of brass and copper, although stainless steel is sometimes needed at high pressures or in marine environments. TEES attach directly to the CGA...

A brass manifold tee that connects to a CGA 540 storage valve and allows the connection of a CGA 540 pigtail or nut and tailpiece to each side. Delivered Oxy-clean for oxygen service to 3000 psi. Additional Info: To join a series of commercial gas cylinders of the same CGA type, MANIFOLD TEES and PIGTAILS are needed. These are usually made of brass and copper, although stainless steel is sometimes needed at high pressures or in marine environments. TEES attach directly to the CGA tank valve,...