Products 1-12 of 35
Show
Aluminum Oxide Media /  lb.
Hot!
Price: Login
Availability: Active
Item #: 42040 -

    Chips are small, hard, randomly-shaped abrasive particles which will loosen scale and rust from tank walls, thereby augmenting the action of solvent chemicals to remove/suspend internal contamination. This material can be used in steel or aluminum tanks and with various adjunct solvents EXCEPT TANK ACID which will attack the chips and produce excessive gassing. Aluminum oxide has been successfully used for tank tumbling for 40 years. Use 25-35 lbs. per tank.

    Bottom Brush Complete - Hvy Duty
    Hot!
    Price: Login
    Availability: Active
    Item #: 43045 -

      Special, small stainless brushes for removing those stubborn deposits on the very bottom of dive tanks. Each brush screws onto a 3 - foot aluminum rod which fits into a 3/8" electric drill. Each unit comes with the brush, 36" extender rod and a plastic guide sleeve to augment insertion through tank necks. Heavier, stiffer wire from bottom flash rust or other deposits in STEEL tanks. Not recommended for Aluminum models. Order #43046 for replacement brush only.

      Bottom Brush Light Duty
      Hot!
      Price: Login
      Availability: Active
      Item #: 43041 -

        Light-Duty Brush - without Rod Fine wire for light rust spots in steel tanks or Bayerite deposits in aluminum models. Will not seriously damage the interior coatings of aluminum tanks. Special, small stainless brushes for removing those stubborn deposits on the very bottom of dive tanks. Each brush screws onto a 3-foot aluminum rod which fits into any 3/8 electric drill. Each unit comes with the brush and a plastic guide sleeve to augment insertion through tank necks.

        Bottom Brush: Complete - Lt Duty
        Hot!
        Price: Login
        Availability: Active
        Item #: 43040 -

          Special, small stainless brushes for removing those stubborn deposits on the very bottom of dive tanks. Each brush screws onto a 3 - foot aluminum rod which fits into any 3/8 electric drill. Each unit comes with the brush, extender rod, and a plastic guide sleeve to augment insertion through tank necks. Fine wire for light rust sports in steel tanks or Bayerite deposits in aluminum models. Will not seriously damage the interior coatings of aluminum tanks. Order #43041 for replacement brush...

          Brush: 02 Tank Neck Thread - 1/2"
          Price: Login
          Availability: Active
          Item #: 43035 -

            This cylindrically shaped brass brush is ideally suited for cleaning the 1/2" NGT threads of older scuba cylinders or those that are 7/8"-14 UNF on "high-pressure" steels. Brass, a non-sparking metal, is excellent for O2 applications because any metal particles accidentally left behind by the brush would be benign in nature.

            Brush: Drill Tank Neck - S/S
            Hot!
            Price: Login
            Availability: Active
            Item #: 43025 -

              A small, cone-shaped stainless steel brush which can be used in any electric drill to safely and quickly clean tank neck threads and the O-ring groove.

              Brush: Tank Thread - 1/2"
              Hot!
              Price: Login
              Availability: Active
              Item #: 43030 -

                Cylindrical, plastic handled brush with fine stainless steel wire for cleaning 1/2" NGT and DIN dive tank neck threads without harm to the threading. Brush wire diameter measures approximately 13/16". Order #43020 for 3/4"-14 NPS tank thread sizes.

                Brush: Tank Thread - 3/4"
                Hot!
                Price: Login
                Availability: Active
                Item #: 43020 -

                  Cylindrical, plastic handled brush with fine stainless steel wire for cleaning 3/4"-14 NPS dive tank neck threads without harm to the threading. Brush wire diameter measures approximately 1-1/16". Order #43030 for 1/2" NGT and DIN tank thread sizes.

                  Bulletin: Oxy Safe Cleaning
                  Oxy Clean!
                  Price: Login
                  Availability: Active
                  Item #: 42125OX -

                    Global currently publishes the only comprehensive manuals on tank cleaning in the entire dive industry. Topics covered are the equipment, techniques, and chemicals for tumbling, washing and drying of contaminated cylinders. "CONVERTING DIVE TANKS FOR NTX/O2 SERVICE" covers the preparation of new and used tanks for specialty gas applications. A copy is available in Tech Bulletin - Library on the Global Home Page.

                    Bulletin: Tank Tumbling Tips
                    Price: Login
                    Availability: Active
                    Item #: 42130 -

                      Global currently publishes the only comprehensive manuals on tank cleaning in the entire dive industry. Topics covered are the equipment, techniques, and chemicals for tumbling, washing and drying of contaminated cylinders. "TANK TUMBLING TIPS" is presently the definitive manual on cleaning air tanks for specialty gas applications. Tank Tumbling Tips is available in Tech Bulletin -Library on the Home Page.

                      Ceramic Media  /  lb.
                      Hot!
                      Price: Login
                      Availability: Active
                      Item #: 42050 -

                        Chips are cylindrical, cast resin pellets with a computer-designed shape for specific cutting activity. Each pellet (5/32" OD x 5/16" long) contains an abrasive agent which gives a very precise, predictable cleaning action. More tolerant of acid than aluminum oxide, ceramics are very useful for tumbling aluminum tanks or for oxygen-cleaning operations. Use 25 - 35 lbs. per tank.

                        Gear Motor for Tumbler
                        Price: Login
                        Availability: Active
                        Item #: 42001 -

                          Gear motor for 42000 Tank Tumbler.