Continuous Nitrox Blending System, 1 inch size, 5 cfm to 13 cfm (200 lpm to 370 lpm). The Stik homogenizes the input gases so thoroughly that they can be piped directly into normal compressors and pressurized. Nitrox with up to 40% oxygen content can be economically prepared with little danger of any mishap; over 40% O2 is NOT safely achievable with this system. The device is adaptable for production of various Nitrox mixtures, compressor flow ratings, and other physical variables. The blender...

Continuous Nitrox Blending System, 1.5 inch size, 13 cfm to 30 cfm (370 lpm to 850 lpm). The Stik homogenizes the input gases so thoroughly that they can be piped directly into normal compressors and pressurized. Nitrox with up to 40% oxygen content can be economically prepared with little danger of any mishap; over 40% O2 is NOT safely achievable with this system. The device is adaptable for production of various Nitrox mixtures, compressor flow ratings, and other physical variables. The...

This adapter permits the use of an oxygen resuscitator regulator (CGA 870) on industrial-size oxygen cylinders (CGA 540). Handy on TEK dives on charter boats where bulk oxygen is available from a CGA 540 connection. 3,000 psi service. Delivered Oxy-clean.

Contains a six-foot-long piece of medical grade tubing, green, Christmas tree connector and special barbed sensor adapter compatible with all of our analyzers.

A compact, regulator combined with a flow meter from 0.5 to 8.0 LPM to deliver gas directly from a scuba tank to an oxygen analyzer (not included) at nearly atmospheric conditions. Tank connection is Scuba yoke style. Includes a 6 foot piece of medical grade tubing with our barbed sensor adapter, which connects to all Global oxygen analyzer sensors. Working pressure: 3,250 psi. Delivered Oxy-clean. For DIN connection, order #45531DOX.

A compact, regulator combined with a flow meter from 0.5 to 8.0 LPM to deliver gas directly from a scuba tank to an oxygen analyzer (not included) at nearly atmospheric conditions. Tank connection is 300 Bar DIN style. Includes a 6 foot piece of medical grade tubing with our barbed sensor adapter, which connects to all Global oxygen analyzer sensors. Working pressure: 4,500 psi. Delivered Oxy-clean.

Adapts the female 3/8 SAE port on many booster pumps to a 1/4 male pipe thread. Comes with a viton o-ring. Made of Stainless steel. Working pressure: 5,000 psi. Delivered Oxy-clean.

Designed to replace an elbow on a booster pump with #6 JIC connections adding an additional 1/4 NPT male connection for auxiliary devices. Brass. Working pressure: 3,250 psi. Delivered Oxy-clean.

Brown colored knob insert denoting Argon or inert gas for 45370OX and 45315OX metering valves.

This converter (CGA 580 to scuba yoke) allows industrial gas companies to adapt their argon whips to fill scuba tanks. 3,000 psi service. Delivered Oxy-clean.

A short (10") transfiller to put argon from CGA 580 industrial tanks in a small, pony sized scuba tanks with Scuba DIN connections. Has a 4,000 psi gauge installed in the bleeder block to monitor transfer pressure. Heavy-duty construction can easily support the weight of small gas tanks during filling operations. Be sure to label these tanks properly so they cannot be confused with breathing gas bottles. 3,000 psi service. Delivered Oxy-clean.

A short (10") transfiller to put argon from CGA 580 industrial tanks in a small, pony sized scuba tanks with yoke connections. Has a 4,000 psi gauge installed in the bleeder block to monitor transfer pressure. Heavy-duty construction can easily support the weight of small gas tanks during filling operations. Be sure to label these tanks properly so they cannot be confused with breathing gas bottles. 3,000 psi service. Delivered Oxy-clean.