Also called a coalescer, this 3.75" x 11" tower fits between the compressor and chemical towers to mechanically dry the air to about 99%. A manual vent on the bottom of the column allows the oil/water sludge to be periodically drained off with the #44135 Drain valve accessory (order separately). Without adequate after separation, the effectiveness of the chemical filters will be impaired and expensive cartridges will be rapidly expended! 6,000 psi service. Includes (2) adapters to convert the...

Backup Ring for Short Filter Tower #44140, Tall Filter Tower #44150 and Purifier Combination Tower #44160.

This 5,000 psi filter has a large sintered element for removing tiny particles (20 micron) from any air stream. Since the regulators in Flowbenches and Haskel pumps conduct enormous air flows, their seats can be damaged by even microscopic particles; use this filter to protect such important equipment. Aluminum body with 1/4" NPTF ports. For rebuild kit order #46111. Additional Info: The creation of scuba air stations requires a variety of high pressure fittings and components as well as...

O-Ring for Short Filter Tower #44140, Tall Filter Tower #44150 and Purifier Combination Tower #44160.

A 3.75" x 24" column containing BOTH a coalescer and a chemical filter. A single filtration device for use on small compressors (10 cfm or less) or to bolster existing systems in certain applications. See price list to select filter cartridges; drain valve NOT included (see #44135). Includes (2) adapters to convert the 3/8 SAE female ports to 1/4 NPT female. Normal Lead Time is 2-4 weeks. Order #44154 for seal kit.

A repair kit for #46110. Includes a new filter element and two O-rings.

Seal Kit for After Separator #44130

Seal Kit for Short Filter Tower #44140, Tall Filter Tower #44150 and Purifier Combination Tower #44160. Order #44152 for O-ring only. Order #44153 for backup ring only.

This 3.75" x 16" tower uses 10" disposable chemical cartridge to cleanse the compressed air. The screw-off end caps make replacing the cartridges a swift, simple task. Each tower will process about 12,000 cu. Ft. of air per cartridge. Select the cartridge with the desired filtrants from the cross-reference in the Global price list. Includes (2) adapters to convert the 3/8 SAE female ports to 1/4 NPT female. Normal Lead Time is 2-4 weeks. Order #44154 for seal kit.

Sintered element replacement for After Separator #44130.

A taller version (33") of our #44140 which will treat about 22,000 cu. Ft. of air per 27" cartridge. Select the cartridge with the desired filtrants from the cross-reference chart in the Global price list. Includes (2) adapters to convert the 3/8 SAE female ports to 1/4 NPT female. Normal Lead Time is 2-4 weeks. Order #44154 for seal kit.