Products 1-12 of 32
Show
Availability: Active
Item #: 46180 -
An excellent brass, air control valve for compressor lines, scuba fill whips, or air distribution panels. Only 1/4 turn is required to open valve, but precise control can still be maintained. Unlike most valves, air can flow either way through the orifice without harming it. A real time-saver on fill whips. 1/4" FNPT ports. 3,000 psi working pressure. Can be panel mounted through a 0.77" hole in a panel no more then 1/4" thick. Very easy to rebuild: Order rebuild kit #46183 for Parker valve or...
Availability: Active
Item #: 46170 -
An excellent stainless steel air control valve for compressor lines, scuba fill whips, or air distribution panels. Only 1/4 turn is required to open valve, but precise control can still be maintained. Unlike most valves, air can flow either way through the orifice without harming it. A real time-saver on fill whips. 1/4" FNPT ports. 6,000 psi working pressure. Can be panel mounted through a 0.77" hole in a panel no more then 1/4" thick. Very easy to rebuild: Order rebuild kit #46171 for Parker...
Availability: Active
Item #: 46045 -
This small safety device that can arrest the air flow in lines or systems (such as scuba filling whips) if that apparatus should fail (hose rupture, O-ring failure, etc.) The flow is reduced to approximately 10%, so personnel can shut down the system with minimal risk and air loss. Flow restriction is adjustable but comes factory preset to approx. 80 SCFM at 5,000 psi and 55 SCFM at 2,500 psi. 1/4 NPT female inlet with 1/4 NPT male outlet. 6,000 psi working pressure.
Availability: Active
Item #: 46331 -
The most popular and rugged valve available for controlling directional air flow in compressor lines or scuba filler whips. Uses same internal parts as many scuba valves. Chrome brass body for 6,000 psi service. Air flows from the 1/4 NPT female input to the 1/4 NPT male output. Can be panel mounted through a 1" hole. Order #46332 for rebuild kit. Order #46331OX for O2/Nitrox version. ...