Bleeder Block ONLY for #'s 45050, 45052

A 300-Bar (4,500 psi) fitting with a fine internal thread to mate to most common bleeder blocks. External thread mates to many DIN tank valves. This can be a replacement part for many of Global's Din 300 Bar attachments. 4,500 psi service. Delivered oxy clean.

A 300-Bar (4,500 psi) fitting with a fine internal thread to mate to most common bleeder blocks. External thread mates to many DIN tank valves. This can be a replacement part for many of Global's Din 300 Bar attachments. 4,500 psi service. Air service only. Order #45181OX for O2/Nitrox version.

Flange Nut and Retainer Clip Only for #45090. One side of this adapter has a machined flange which mates to the O-ring groove on any scuba tank valve; the other side is ported 1/4" NPTF. Used as a replacement part for many Global Yoke assemblies. 3,200 psi duty.

Replacement Bleeder Block w/Nut and Bleeder Screw. For #45050. Common in-line block, bleeder, and yoke retainer nut used on filler whips and other scuba devices. Also accepts the #45181 DIN fitting, to create a DIN filler.

Replacement Ported Bleeder Block w/Nut Bleeder Screw. For #45056. Same as #45052, but the block also has a 1/4" NPTF port in it.

Replacement Bleeder Screw ONLY for #45050. A replacement bleeder screw (3/8-24 thread) with a nylon seat for the standard bleeder blocks used on filler whips, tank pressure checkers, crossovers.

Chromed-brass block, bleeder screw, and yoke retainer nut. Block attaches at 90* to the line valve and hose via a 1/4" NPTF port. It will also accept the Global #45181 DIN fitting. Replacement part for 45026 and 45027.

Seal for SCUBA to SCBA Adapter (45000)

Global's standard Yoke and Yoke Screw assembly. Use as a replacement part for any of Global's Yoke assemblies. 3,200 psi service.