Contains a six-foot-long piece of medical grade tubing, green, Christmas tree connector and special barbed sensor adapter compatible with all of our analyzers.

A compact, regulator combined with a flow meter from 0.5 to 8.0 LPM to deliver gas directly from a scuba tank to an oxygen analyzer (not included) at nearly atmospheric conditions. Tank connection is Scuba yoke style. Includes a 6 foot piece of medical grade tubing with our barbed sensor adapter, which connects to all Global oxygen analyzer sensors. Working pressure: 3,250 psi. Delivered Oxy-clean. For DIN connection, order #45531DOX.

A compact, regulator combined with a flow meter from 0.5 to 8.0 LPM to deliver gas directly from a scuba tank to an oxygen analyzer (not included) at nearly atmospheric conditions. Tank connection is 300 Bar DIN style. Includes a 6 foot piece of medical grade tubing with our barbed sensor adapter, which connects to all Global oxygen analyzer sensors. Working pressure: 4,500 psi. Delivered Oxy-clean.

A gas transfer device allowing pure Oxygen from commercial tanks with CGA 540 connections to be transferred into conventional yoke-mode, oxy-clean scuba tanks through a 4 foot teflon core hose. This deluxe version includes a 4,000 psi oxygen gauge installed in the bleeder block to monitor transfill pressures. Includes a metered orifice to prevent rapid transfilling, which can be dangerous. This device is NOT intended for gas mixing purposes; it has only limited flow control, no check valve to...

A compact, regulator combined with a flow meter from 0.5 to 8.0 LPM to deliver gas directly from a scuba tank to an oxygen analyzer (not included) at nearly atmospheric conditions. Tank connection is Scuba yoke style and is monitored by a 5,000 psi Oxy-clean gauge. Includes a 6 foot piece of medical grade tubing with our barbed sensor adapter, which connects to all Global oxygen analyzer sensors. Working pressure: 3,250 psi. Delivered Oxy-clean. For DIN connection, order 45533DOX.

A low cost oxygen analyzer with built in sensor. Measures from 0-99.9% oxygen and carries a 24 month warranty. Discard entire unit at sensor end of life. Common accessories are the #48052OX analyzer hook up kit and the #48054BA sensor barb.

This handheld analyzer measures oxygen content from 0-100% using traditional galvanic sensor technology. The remote sensor is tethered to the analyzer with a 10 foot coiled cable. With a long life sensor, the analyzer and sensor both carry a 24 month warranty. Order #48045OX for replacement sensor. Common accessories are the #48052OX analyzer hook up kit and the #48054BA sensor barb.

It is not widely known, but most Oxygen analyzers operate optimally when a specific gas pressure is applied to the sensor. All of Global's analyzers are optimal when they have 1.5 psi on their sensor. This can be achieved by either controller flow or pressure. This device attaches directly to a DIN style scuba tank. Gas then passes through a mico-orifice, travels down medical grade tubing where it is relieved at 1.5 psi and terminates with our barbed sensor adapter, which connects to all...

It is not widely known, but most Oxygen analyzers operate optimally when a specific gas pressure is applied to the sensor. All of Global's analyzers are optimal when they have 1.5 psi on their sensor. This can be achieved by either controller flow or pressure. This device attaches directly to a yoke style scuba tank. Gas then passes through a mico-orifice, travels down medical grade tubing where it is relieved at 1.5 psi and terminates with our barbed sensor adapter, which connects to all...

Oxygen Christmas Tree Connector

***CLOSEOUT, Discontinued: When existing inventory is sold, no more will be produced. 50% discount to be applied.*** Dive cylinders containing specialty gases should be clearly marked to prevent confusion or a dangerous mix-up. Several TEK diving accidents are already attributable to just such mistakes. Global’s gas stickers measure 3" x 20" and are printed in colors conforming to CGA suggested code. Stickers can be applied vertically or horizontally around the tank. They can also be cut...

Replacement sensor for 48042OX. Fits MaxO2+A analyzer. 24 month warranty.