This, one time use, rupture disc is designed to activate at a pressure of 6,750 psi. It is marked 6,750 psi. It is recommended for use on DOT exemption cylinders that have a service pressure of 4,500 psi. For use on TV series valves. *** Discontinued by Manufacturer: Obsolete / No replacements: Purchase of newer valve model recommended ***

Seat Plug only. Fits all GV series valves that Global offers. CGA346, CGA 347, CGA 540, CGA 580 and CGA 702.

Seat Plug only. Fits all TV series valves that Global offers. CGA346, CGA 347, CGA 540 & CGA 580.

Prudent dive shops strive to maintain a low dew point in their scuba air and also achieve maximum life expectancy from expensive filter cartridges. However, air must be 99% dry before entering the chemical filters or neither objective will be met! To accomplish this, an after-separator and a priority valve are required. The latter unit is an adjustable check valve which holds about 1700 psi of back-pressure on the filter system at all times. This raises the density of the air, increases the...

Adjustable "pop-off" valve which can be calibrated from 300 to 5,500 psi. Anodized aluminum for 6,000 psi service. 1/4" NPTM inlet. Used to protect filters, separators, storage vessels or compressor interstages. Comes uncalibrated with instructions. Additional Info: These special valves are used to protect pressure-sensitive components or to relieve pressure at some prescribed level in compressed air systems. Standard relief valves are designed for sudden, intermittent, and sporadic service,...

Standard elbow with 1/4NPT male on one end and 1/4 NPT female on other end. Working Pressure 6,600 psi. Stainless Steel. Old part #47241.

Standard elbow with 1/4NPT male on one end and 1/4 NPT female on other end. Working Pressure 5,000 psi. Steel. Old part #47240.

Standard elbow with 1/4NPT male on one end and 1/4 NPT female on other end. Working Pressure 3,300 psi. Brass. Old part #47242.

Two female 1/4 NPT ports at right angles to one 1/4 NPT male port. Sometimes called a run tee. Working Pressure: 3,300 psi. Brass. Old part #47312.

Two female 1/4 NPT ports at right angles to one 1/4 NPT male port. Sometimes called a run tee. Working Pressure: 6,600 psi. Stainless Steel. Old part #47311.

Two female 1/4 NPT ports at right angles to one 1/4 NPT male port. Sometimes called a run tee. Working Pressure: 5,000 psi. Steel. Old part #47310.

O2 Teflon o-ring for 46311OX.