A special stainless tool with two bulbous, offset ends with one side ground flat. Handy for pushing/pulling O-rings into recessed grooves like those inside regulator bodies.

A kit consisting of 12 each of 18 different O-rings, which are commonly used for servicing scuba equipment. Kit comes in a compartmental plastic box with a guide which defines important uses for each seal. A great product for shops opening a service department, but unsure of just which O-rings to stock. All O-rings can be individually reordered as required.

Set of 5 stainless micro-probes for removing or pushing gaskets and O-rings. Each tool has a different shaped end such as a loop or hook.

Viton (Fluorocarbon) for pure oxygen service to 2,500 psi. Swivel Deal on Submersible gauges/consoles.

Viton (Fluorocarbon) for pure oxygen service to 2,500 psi.

Viton (Fluorocarbon) for pure oxygen service to 2,500 psi. "Flow-Into" piston HP seal.

Viton (Fluorocarbon) for pure oxygen service to 2,500 psi.

Viton (Fluorocarbon) for pure oxygen service to 2,500 psi.

Viton (Fluorocarbon) for pure oxygen service to 2,500 psi. Hose swivel internal seal; regulator HP seal; 2nd stage oriface.

Viton (Fluorocarbon) for pure oxygen service to 2,500 psi. Male end regulator hose; regulator port plugs; hose adapters.

Viton (Fluorocarbon) for pure oxygen service to 2,500 psi. Male end - HP hose; filter seal; hose adapters; LP swivels; HP ports.

Viton (Fluorocarbon) for pure oxygen service to 2,500 psi