Chromed-brass block, bleeder screw, and yoke retainer nut. Block attaches at 90* to the line valve and hose via a 1/4" NPTF port. It will also accept the Global #45181 DIN fitting. Replacement part for 45026 and 45027.

A chromed-brass DIN block with bleeder in which air enters at a right angle to the long axis of the block. Angular arrangement improves handling of cylinders when they must be placed in water cooling tanks or filled with BC's or packs in place. 1/4" NPTF inlet. 4,500 psi service. Order #45027OX for O2/Nitrox version.

A chromed-brass yoke block with bleeder in which air enters at a right angle to the long axis of the block. Angular arrangement improves handling of cylinders when they must be placed in water cooling tanks or filled with BC's or packs in place. 1/4" NPTF inlet. 3,200 psi service. Order #45026OX for O2/Nitrox version.

A chromed-brass DIN block with bleeder in which air enters at a right angle to the long axis of the block. Angular arrangement improves handling of cylinders when they must be placed in water cooling tanks or filled with BC's or packs in place. 1/4" NPTF inlet. 4,500 psi service. Delivered Oxy Clean.

A chromed-brass yoke block with bleeder in which air enters at a right angle to the long axis of the block. Angular arrangement improves handling of cylinders when they must be placed in water cooling tanks or filled with BC's or packs in place. 1/4" NPTF inlet. 3,200 psi service. Delivered Oxy Clean.

Designed for filling tanks with a DIN connection. This whip incorporates a right angle bleeder block. Angular arrangement improves handling of cylinders when they must be placed in water cooling tanks or filled with BC's or packs in place. Global produces all scuba filler whips using our exclusive high pressure certified thermoplastic hose rated for 6,000 psi working pressure and 20,000 psi burst. Each filler whip has a 5 foot long, 1/4" ID hose with 1/4" NPT male end, line valve and bleeder...

Designed for filling tanks with the standard Yoke connection. This whip incorporates a right angle bleeder block. Angular arrangement improves handling of cylinders when they must be placed in water cooling tanks or filled with BC's or packs in place. Global produces all scuba filler whips using our exclusive high pressure certified thermoplastic hose rated for 6,000 psi working pressure and 20,000 psi burst. Each filler whip has a 5 foot long, 1/4" ID hose with 1/4" NPT male end, line valve...

Used to check the pressure in tanks with SCBA tanks with CGA 346/347 type valves. Has a sealed, stainless steel cased 5,000 psi oil-filled gauge for constant, rugged usage. CGA attachment and bleeder are stainless steel for added durability. Gauge is protected in a deluxe rubber cover/protector. All Global tank checkers come with an integrated bleeder. Service to 4,500/ psi. Air service only.

A filling adapter to allow fire-rescue air systems (CGA 347) to fill scuba tanks with DIN-mode valves. Attaches to the end of a CGA 347 fill whip. Service to 4500 psi.

The reverse adapter of #45000. Fire departments equipped with a CGA 346 filler whip can fill scuba tanks (3,200 psi) using this adapter. Consists of scuba yoke, bleeder block, and CGA 346/347 adapter.

Converts a yoke filler whip to fill SCBA (fire / medical) tanks with a stainless steel hand tight wheel. Fits CGA 347 for MSA. 4,500 psi service. Order #45016 for replacement seal.

A rectangular, chromed-plated brass block containing an O-ring sealed regulator port identical to that of any scuba valve. Air inlet port in the base of the block is 1/4" NPTF. Used for various jump adapters and TEK diving applications. 3,200 psi service. Order #45020OX for O2/Nitrox version.