Used to control air to flowbenches, scuba air stations and air distribution panels. 6,000 psi duty. Adjustable air control from 50 to 5,000 psi with high flows. Self-venting when pressure is reduced. Has 2 - 1/4 NPT female inlet ports (1 for a gauge) and 2 - 1/4 NPT female outlet ports (1 for a gauge). This regulator can help simplify the process of tank filling. Simply dial in the desired set pressure on the regulator and the gas input to your filling system will be arrested automatically at...

Used to control air to flowbenches, scuba air stations and air distribution panels. 6,000 psi max input pressure. Adjustable air control from 50 to 1,500 psi with high flows. Self-venting when pressure is reduced. Has 2 - 1/4 NPT female inlet ports (1 for a gauge) and 2 - 1/4 NPT female outlet ports (1 for a gauge). This regulator can help simplify the process of tank filling. Simply dial in the desired set pressure on the regulator and the gas input to your filling system will be arrested...

Used to control air to flowbenches, scuba air stations and air distribution panels. 6,000 psi max input pressure. Adjustable air control from 50 to 400 psi with high flows. Self-venting when pressure is reduced. Has 2 - 1/4 NPT female inlet ports (1 for a gauge) and 2 - 1/4 NPT female outlet ports (1 for a gauge). This regulator can help simplify the process of tank filling. Simply dial in the desired set pressure on the regulator and the gas input to your filling system will be arrested...

A brass manifold tee that connects to a CGA 347 storage valve and allows the connection of a CGA 347 pigtail or nut and tailpiece to each side. or air to 5,500 psi. Additional Info: To join a series of commercial gas cylinders of the same CGA type, MANIFOLD TEES and PIGTAILS are needed. These are usually made of brass and copper, although stainless steel is sometimes needed at high pressures or in marine environments. TEES attach directly to the CGA tank valve, thereby providing two extra CGA...

Adds a barbed fitting to the drain port of the #46233 allowing the vented gas to be tubed and directed. Commonly used for moisture or liquid drains, such as those on an after separator. Upstream pressures of up to 6,000 psi are allowed. But, care should be taken when draining due to the simple barb connection on the output. High pressure connection is 1/4 NPT male.

1/4 NPT male, Hollow Hex Plug, Brass. Working Pressure: 3,900psi. Old part #47223.

Coupling joins two hoses with #4 JIC female swivels. Stainless Steel. Working Pressure: 5,000 psi. Old part #47091.

Coupling joins two hoses with #4 JIC female swivels. Steel. Working Pressure: 5,000 psi. Old part #47090.

A special chromed-brass body with a 1/4 NPT male and female end ports. A standard Global bleeder is opposite a 1/4 NPT female gauge port. 3,250 psi service. This part can be ordered Oxy-clean. See 46335OX for Oxy-clean version. Previous Oxy-clean version of this part went by part #45335OX.

A special chromed-brass body with a 1/4 NPT male and female end ports. A standard Global bleeder is opposite a 1/4 NPT female gauge port. 3,250 psi service. Provided oxy-clean.

A special chromed-brass body with a 1/4 NPT male and female end ports. A standard Global bleeder is opposite a 1/4 NPT female gauge port. The bleeder screw has a 10-24 tapped hole. This allows the screw to be attached to a tether preventing loss or damage. 3,250 psi service.

A special chromed-brass body with a 1/4 NPT male and female end ports. A standard Global bleeder is opposite a 1/4 NPT female gauge port. The bleeder screw has a 10-24 tapped hole. This allows the screw to be attached to a tether preventing loss or damage. 3,250 psi service. Provided oxy-clean.