Also called Compound O, it is used following the tumbling of steel tanks to prevent flash rust, a reddish film which often forms on the interior walls during drying of the cleaned cylinder. This chemical replaces Compound B, a popular anti-rust agent which is NOT oxygen compatible. Compound O can be used for both air and O2 / Nitrox tanks. GALLON

Also called Compound O, it is used following the tumbling of steel tanks to prevent flash rust, a reddish film which often forms on the interior walls during drying of the cleaned cylinder. This chemical replaces Compound B, a popular anti-rust agent which is NOT oxygen compatible. Compound O can be used for both air and O2 / Nitrox tanks. QUART

With toothbrush - like structure, this tool has a heavy plastic body with nylon bristles for cleaning small parts.

With toothbrush - like structure, this tool has a heavy plastic body with stainless steel bristles for cleaning small parts.

A chrome-plated 1.5" hexagonal brass block with 6 machined grooves which can be used to estimate the depth of pits in dive tank walls. Slots ranging from 0.01" to 0.06" deep can be used as a reference after the depth of the pit has been probed.

A threaded, plastic plug with a centralized hole through which the rod of the whip can pass. The plugs thread matches that of 3/4" NPS tanks and, when screwed into place, controls the angle of the whip to prevent damage to the strands while still achieving proper cleaning.

Whip for pony or other small tanks. An essential device for LIGHT-DUTY cleaning inside scuba tanks when tumbling is not needed, but deposits like flash rust or aluminum Bayerite should be removed. Minor contaminants in large cylinders which will not fit the tumbler machine can also be whipped out. The whip is a flexible "broom" consisting of strands of a space-age plastic coated with a durable abrasive and crimped onto an aluminum rod. The whip can be spun by any 3/8-electric drill. NOTE: To...

A unique pliers which can reach into the mouthpiece tube of the Poseidon 2nd stage and turn the adjusting cam which sets the activation effort. The tool grips the cam snugly and allows slow, stepped rotation of the knurled roller.

A stainless steel pick with one large semi-loop end and one 45° curved end for probing/removing O-rings.

A stainless steel pick with two slightly spiral, angular ends. Great for extracting O-rings set in deep or recessed grooves.

A stainless steel pick with one large semi-loop end and one short, right angle hook for probing or removing O-rings.

A stainless steel pick with two, short right-angle hooks. Excellent for removing O-rings from deep channels or difficult insets.