A stainless steel brush used in an electric drill to clean/polish the inside of the second-stage air inlet barrels employed in such popular regulators as Dacor and Scubapro. Produces an excellent finish in this hard-to-reach place! A plastic tip on the end of the reamer prevents damage to the blind end of the barrel!

A biodegradable, acidic detergent which removes oxides, tarnish, rust, scale, oil, and salt-water encrustments from brass, iron, stainless and plastic parts. This solvent meets FDA, USDA, and various mil-spec requirements. The acid can be diluted to about 25% strength; at that concentration, most scuba parts will be cleaned by a 3-15 minute submersion, depending upon the degree of contamination. For heavy encrusted items, the cleaner can be applied full strength directly with a brush or swab....

A biodegradable, acidic detergent which removes oxides, tarnish, rust, scale, oil, and salt-water encrustments from brass, iron, stainless and plastic parts. This solvent meets FDA, USDA, and various mil-spec requirements. The acid can be diluted to about 25% strength; at that concentration, most scuba parts will be cleaned by a 3-15 minute submersion, depending upon the degree of contamination. For heavy encrusted items, the cleaner can be applied full strength directly with a brush or swab....

Regulator Tool Kit

This metal mesh basket holds parts during ultrasonic cleaning and rinsing procedures.

Like #43051, but smaller for the Q-90 unit.

Like #43055, but smaller to fit the Q-90 machine.

A 220-volt version of the #43070. PLEASE DESIGNATE COUNTRY OF USE WHEN ORDERING. This handsome, rectangular shaped ultrasonic unit is 6.9" x 6.4" x 9" overall with a 2 Qt. Tank measuring 5.9" x 5.4" x 4". It develops 160 watts of cleaning power and has an automatic timer and pilot light.

A 220-volt version of the #43050. PLEASE DESIGNATE COUNTRY OF USE WHEN ORDERING. This top of the line, powerful (320) watts) machine measures 12/5" x 8.2" X 9" overall with a blue/white vinyl-clad finish and a 9.4" x 5.4" x 4" stainless tank of 3.4 Qt. Capacity. Controls include automatic cavitation tuning, cycle timer, and a pilot light. The tank has a convenient drain plug, a stainless cover, and can hold several dismantled regulators or valves at one time

Spade Tip ONLY for 2nd Stage Adjusting Tool (43230)

A wrench with an articulated, semi-circular arm containing an 1/8" pin for engaging/removing the piston caps on many regulators. Will handle caps from 3/4" to 2" in diameter. For 3/16" pin: order #43260.

A wrench with an articulated, semi-circular arm containing an 3/16" pin which works best on caps with larger flood ports or detents.